Bison High Temperature Silicone Sealant, 6305454, 60ML, Red
Key features
- Heat resistant silicone sealant
- Heat resistant upon complete curing up to 250 Deg.C and briefly (approximately 1 hour) up to a maximum of 300 Deg.C
- Easy to apply
- Sealant colour: black
- Acetic acid leaving sealant
- Colourfast
Specifications
| SV Code | 165796221776 |
| Brand | Bison |
| Category | Silicone Sealant |
| Unit | Piece |
| Size | 60 ml |
| Colour | Red |
| Temperature Resistance | -60 to 260 Deg.C |
| Coverage Area | 1.5 Mtr |
| Working Temperature | +5 to +40 Deg.C |
| Density | 1.03 g/cu.cm |
| Flash Point | >55 Deg.C |
| Viscosity | Pasty |
| Base Chemical | Silicone Elastomer |
| Brand Origin (not manufacture) | United States |
| Delivery | Not on the shelf right now; 7 working days to source and deliver. |
Description
Heat resistant silicone sealant for joining and sealing joints that are exposed to high temperatures. Heat resistance: max. 300 Deg.C.
Suitable ForSuitable for joining and sealing joints, seams and cracks in places where high heat resistance is required. Adheres very well to glass, enamel, tiles, glazed ceramics and smooth metals. Particularly suited for joining and sealing oven and microwave windows, edges around (ceramic) hot plates, heating ducts, flues, heat screens for the fireplace (also suitable in its fluid form for automotive applications).
Not Suitable ForNot suitable for bitumen, polyethylene (PE), polypropylene (PP), PTFE and aquaria.
Surface requirementsEnsure that joints are clean, dry and free of dust, rust and grease. Absorbent substrates and synthetics should be pre-treated with BISON Silicone Primer.
Preliminary Surface TreatmentFor a good result, cover the joint’s edges with masking tape. If necessary, prevent three-sided bonding by filling the joint with a foam backer rod or PE film.
Coverage1 tube for approx. 1.5 m (depending on the diameter of the joint).
Handling of PackagingTurn the cap off the tube Cut the synthetic cannula diagonally.
Directions for UseInject sealant evenly and slowly into the joint. Immediately smooth with BISON Multi Tool or a finger and soapy water. For bonding, join the parts within 5 minutes. After approx. 15 minutes, a surface skin will form. BISON High Temp reaches its high heat resistance after fully curing. The curing can be accelerated by heating the sealant to a maximum of 150 Deg.C.
Points of AttentionSilicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing.
Stains/ResidueImmediately remove stains with white spirit. Cured sealant can only be removed mechanically.
Storage ConditionsStore in properly sealed packaging in a dry place at between +5°C and +25 Deg.C
Technical SpecificationsFeatures
- Heat resistant silicone sealant
- Heat resistant upon complete curing up to 250 Deg.C and briefly (approximately 1 hour) up to a maximum of 300 Deg.C
- Easy to apply
- Sealant colour: black
- Acetic acid leaving sealant
- Colourfast
- Sealant may expand when it comes into contact with grease, oil, coolant and fuels.
Related products
Questions & answers
No questions yet — be the first to ask.
Customer reviews
Sign in with the account that bought this product to write a review.No reviews yet. Be the first to review this product.