Bison Super Wood Glue, 6305289, 75GM, White

Product Description

High quality, water resistant (EN 204 D3) white wood glue for indoor and outdoor use. Dries transparent. Stronger than wood. For bonding and laminating of practically all hard, soft and exotic types of wood.

Field of ApplicationFor the water resistant joining and laminating of practically all hard, soft and exotic woods. Suitable for well-fitting, non-load bearing wooden structures using, for example, finger joints, dovetail joints, mortise and tenon joints, dowels and springs. Suitable for indoor and outdoor applications, especially for glue joints that demand water resistance. For surface bonding wood, hard and softboard, chipboard, multiplex plywood, MDF, paper, cardboard and hardboard. Also suitable for laminating veneer and hard plastic sheet (HPL, Formica, Duropal, Resopal) on a wooden surface. D3: Interior spaces in which passing water, condensation and / or heavy stress due to increased relative humidity occurs frequently for a short time. Exteriors not exposed to weather influences.

Surface Requirements

The surfaces to be bonded need to be clean, dry and free of dust. Ensure a well-fitting joint.

Preliminary Surface Treatment

Greasy wood types should be degreased.

Tools

Fine-toothed glue spreader (1 mm), brush or roller, clamp or press.

Directions for Use

Apply the adhesive with a brush or some other tool in an even and thin layer on one or both parts. Let penetrate for a few minutes, the assemble the parts and clamp or press for 30-60 minutes. The desired pressure is 2-5 kg/cm²

Stains/Residue

Remove adhesive residues immediately with water. Dry adhesive residue can only be removed mechanically

Technical Specifications

Colour After Curing/Drying: Transparent

Dilute: Dilute only with wate.

Filling Capacity: Nil

Open Time Approx.: 8 Minutes

Solid Matter Approx.: 50%

Time to press (+20 Deg.C): 15 minutes (more in case of tension)

Viscosity Approx.: 13000 mPa·s

White Point Approx.: 3 Deg.C