Effisus 2Bond DS Tape, 250801, 1.54MM Thk, 5CM Width x 15.25 Mtrs Length, Black

Effisus 2Bond DS Tape is a pure advanced Microsealant with a removable siliconized release liner on each side. Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials. Effisus 2Bond DS Tape creates a tight, permanent and waterproof seal. Effisus 2Bond DS Tape remains flexible in temperatures as low as -57 deg.C, making it virtually impossible to thermally shock the seal, causing a leak. Effisus 2Bond DS Tape to a wide range of surfaces including EPDM, TPO, most PVC, CSPE/Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminium and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc. Effisus 2Bond DS Tape is a self-sealing adhesive that creates a water-tight, conformable seal between two or more irregular surfaces, this being a weatherproof and permanent bond, between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of microsealant to fill a gasket or to seal a hole or gap, as needed. Effisus 2Bond DS Tape utilizes advanced MicroSealant Technology, a 100 percent solids formulation of synthetic resins, thermoplastics and non-curing rubber (non butyl) with a built in primer, between two silicone release liners. Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with Effisus Setup EC Cleaner or a non residue cleaner, such as acetone or lacquer thinner. Remove salt and other contaminants.