It's two instruments in one! ETI's 814-065 is both an infrared, non-contact digital thermometer and includes a folding penetration temperature probe suitable for direct contact temperature measurements. Ideal for use in food production and other similar applications. the 814-065 gives you a comprehensive temperature reading of both core and surface temperatures. Use the built-in infrared measurement mode to measure the surface without contact from -32.9 to 219.9 Degree C, then use the probe to test liquids and semi-solid materials (e.g. food) with range from -54.9 to 329.9 Degree C. Switching between the two modes is simple - just tap the IR On button to switch. The penetration probe is made from high quality, easy-to-clean stainless steel and is 3.3mm in diameter and 120mm in length. When not in use, the probe folds away neatly into the body of the thermometer for storage.
- Two instruments in one - both an infrared (non-contact) and penetration (contact) type digital thermometer!
- Stainless steel foldaway temperature probe with 3.3mm diameter and 120mm length (folds back into the body of the thermometer when not in use)
- Test infrared temperatures from -32.9 to 219.9 Degree C with resolution of 0.1 Degree C and accuracy of ±2 Percentage of reading
- Distance-to-spot ratio of 5:1 - hold as close as possible to the target when testing using the IR mode
- Direct contact (probe) measurement range from -54.9 to 329.9 Degree C with resolution of -0.1 Degree C and accuracy of ±1 Percentage of reading
- Powered by a single 3V CR2032 lithium coin cell battery with life of 40 hours
- Switch between Celsius and Fahrenheit measurement modes
- Lock function for continuous temperature measurements
- MAX/MIN mode calculates and displays the maximum and minimum temperatures taken over a period of time
- Automatic power off after 15 seconds to help save battery life