Fluke Leakage Current Clamp Meter, 368 FC-UMS, 60A, 40MM Jaw

The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line. The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference. The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 368 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.
Specifications

Measurement function: Alternating current

AC ampere range: 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A

Range/Resolution: 3 mA / 0.001 mA, 30 mA / 0.01 mA, 300 mA / 0.1 mA, 3 A / 0.001 A, 30 A / 0.01 A, 60 A / 0.1 A

Accuracy - filter activated (40 to 70 Hz), filter off (40 to 1 kHz): 3 mA to 30 A - 1% + 5 digits, 60A - 2% + 5 digits

Automatic shut-down: Meter automatically shuts down after 15 minutes of inactivity

General safety: IEC 61010-1: Pollution Degree 2

Operating humidity: Non-condensing (<10 Deg.C), 90% relative humidity (10 Deg.C to 30 Deg.C), 75% relative humidity (30 Deg.C to 40 Deg.C), 45% relative humidity (40 Deg.C to 50 Deg.C)

Protection class IEC 60529: IP30 (jaw closed)

Current sensor action category: IEC 61557-13: Class 2, <=30 A / m