Vertical Categories
SupplyVan
SupplyVan

Hotline Free:06-900-6789-00

Kee Safety Standard Railing Flange, 62-8, Kee Klamp, 48.3MM
Kee Safety Standard Railing Flange, 62-8, Kee Klamp, 48.3MM

Kee Safety Standard Railing Flange, 62-8, Kee Klamp, 48.3MM

(No reviews yet) Write a Review
Brand
SKU:
788699342487
Minimum Purchase:
1 unit
Item Name:
Standard Railing Flange
Model:
62-8
Manufacturer:
Kee Safety
Material:
Ductile Iron
Length (Inch):
2.68 Inch
Outer Diameter (MilliMeter):
48.3mm
Loading Capacity:
2000 lbs. per set screw
Set Screw:
Case-Hardened
Brand Origin (not manufacture):
United Kingdom
Standards:
ISO 1461
Delivery Time:
2-7 Days
Unit:
Piece
See Full Product Specs
AED74.00 (Incl.VAT)

Available on Request

Kee Safety Standard Railing Flange, 62-8, Kee Klamp, 48.3MM

Kee Safety Standard Railing Flange, 62-8, Kee Klamp, 48.3MM

SKU: 788699342487

Kee Safety Standard Railing Flange is ideal when a structural fixing is required, when fixing guard railing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to insure proper fixing with either a mechanical or chemical anchor.
  • High corrosion resistance
  • No welding or threading
  • Galvanized for long lasting protection
  • Recessed screws for a smooth look
  • Quick installation
  • Large set screws resists thread stripping
  • The two set screws in the vertical socket give greater side load stability to the upright
  • It is recommended that the fixing holes in the flange should be in line with the applied load
  • Used for DDA compliant railing
  • Standards: ASTM A47-77-32510
Kee Safety 90 Degree Elbow, 15-8, Kee Klamp, 48.3MM

Kee Safety

Kee Safety 90 Degree Elbow, 15-8, Kee Klamp, 48.3MM

AED42.50 (Incl.VAT)
Kee Safety 90 Degree Elbow joint, is most frequently used as an end joint for the top rail of safety railing on a level site.High corrosion resistanceNo welding or threadingGalvanized for long...
Available on Request
Kee Safety Single Socket Tee, 10-8, Kee Klamp, 48.3MM

Kee Safety

Kee Safety Single Socket Tee, 10-8, Kee Klamp, 48.3MM

AED32.25 (Incl.VAT)
Kee Safety Single Socket Tee is designed to give a 90 Degree butt joint between two tubes.Frequently used for the joint between end uprights and middle rail where the railing site is straight and...
Available on Request
Kee Safety Three Socket Tee, 25-8, Kee Klamp, 48.3MM

Kee Safety

Kee Safety Three Socket Tee, 25-8, Kee Klamp, 48.3MM

AED51.50 (Incl.VAT)
Kee Safety Three Socket Tee is the most commonly used as the 90 Degree joint between the top rail and an intermediate upright on safety railing.As there are two socket set screws in the sleeve, this...
Available on Request
Kee Safety Straight Coupling, 14-8, Kee Klamp, 40MM

Kee Safety

Kee Safety Straight Coupling, 14-8, Kee Klamp, 40MM

AED35.50 (Incl.VAT)
Kee Safety Straight Coupling is designed to form an in-line joint between two pieces of tube of the same size.If a constant diameter is required along the outside of the tube (such as for DDA...
Available on Request
Kee Safety Plastic Plug, 77-8, Kee Klamp, 40MM

Kee Safety

Kee Safety Plastic Plug, 77-8, Kee Klamp, 40MM

AED5.00 (Incl.VAT)
Kee Safety Plastic Plug is a grey plastic plug to fit open ended tubes. It is suitable for medium and heavy tubing only.High corrosion resistanceNo welding or threadingGalvanized for long lasting...
Available on Request