UAE Dirham
Loctite Superflex Red High Temp RTV is used for gasketing and sealing applications for both plant maintenance and small, medium, and large-sized OEM. It is specially formulated to meet the low silicone volatiles requirements of the automotive industry for 315deg.C flange sealants. As a formed-in-place gasket/sealant, LOCTITE Superflex Red High Temp RTV has been designed to give outstanding performance in typical automotive gasketing applications including valve covers, rocker covers, oil pans, water pumps, end seals, intake manifolds, and rear axle housings. This product is also used as a sealant and adhesive for assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting, and heating elements in electrical appliances. This product is typically used in applications up to 315 deg.C.
- LOCTITE Superflex Red High Temp RTV is tested to the lot requirements of Military Specification Mil-A-46106A
- LOCTITE Superflex Red High Temp RTV cures on exposure to moisture in the air
- The product dries tack free in 1 hour and fully cures in 24 hours
- Cure times will vary with temperature, humidity and gap
- Enhances load bearing and shock absorbing characteristics of the bond area
- At 260 deg.C, softening is due to reversion and will occur regardless of how the sealant is cured
- At 315 deg.C, hardening is due to thermal rearrangement of the polymer and also oxidation
- Flash Point 199.4 Deg.F
- Full Cure 24 hours
- Begins to Harden 10 min
- Coat Pre-cut Gaskets for Increased Reliability
- One Component - Requires No Mixing
- Good Temperature Resistance
- Cured for 7 days at 25 deg.C/50% RH
