Retaining cylindrical assemblies under high dynamical stress, medium viscosity, high strength.In general, Weiconlock does not require special pre-treatments slightly oily surfaces (e.g. on as received parts) will be tolerated.However, best results will be achieved on cleaned, degreased parts (use Weicon Surface Cleaner). If required, the parts should be slightly roughened.
- Do not pour back into the bottle any Weiconlock fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.
- Weiconlock can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle or tube keeps Weiconlock liquid.
- Handling strength: 5 min.