Weicon Rust Converter Liquid, 15152001, 1 Ltr

WEICON Rust Converter neutralizes rust on rusty cast iron and steel surfaces. Rust onverter reliably stops the corrosion process and thus provides a base coat for ubsequent surface coatings. Due to its special formula, Rust Converter penetrates rust and, in a chemical process, converts iron oxides into a stable black layer. Rust Converter can be applied on all rusty areas, e.g. on machines or in plants, on agricultural equipment as well as motor vehicles.
Surface pre-treatment

The surface has to be dry, clean and free from dust, oil and grease.The surface has to be dry, clean and free from dust, oil and grease. Remove loose rust, grease, dirt and paint with a wire brush, grinding disc, etc. Thoroughly remove grinding dust with WEICON Cleaner Spray S.

Processing

Shake can well before use. Apply the Rust Converter in thin and even layers with a paint brush or paint runner. After 15 minutes, the rust on the workpiece will turn black. If this is not the case, another layer has to be applied after 30 minutes. Before painting, allow the coated area to evaporate for 3 to 24 hours (depending on the ambient temperature).

Technical Data:

Base: lactic acid

Odour: Nearly odourless

Colour: Milky

Storage stability: 24 months

Features: Rust converter and base coat in one process

Temperature resistance: -30 to +80 (-22 to +176 Deg.F) Deg.C

pH Value: 2.5