Weicon Solar-Flex, 13750290, 290ML, White

Weicon Solar-Flex is strong, non-corrosive, over paintable (wet in wet), weather-resistant and resistant to UV rays. It is free of silicone, isocyanate, halogens and solvents. Weicon Solar-Flex is an elastic adhesive on a MS polymer basis specially developed for the solar industry. Both the very high initial bonding power and the fast development of adhesive strength enable bonds to be achieved even on vertical surfaces. Replaces traditional fi xings in the assembly of solar and photovoltaic power systems.
Surface pre-treatment:

The surfaces must be clean and free of grease. Many surface contaminants, e.g. oil, dust and dirt, can be removed with Weicon Surface Cleaner. For heavily soiled metal surfaces, we recommend Weicon Cleaner Spray S; Weicon Sealant and Adhesive Remover is suitable for removing old paint or adhesive residues. Most materials can be bonded well to themselves and among each other. For certain materials or extreme requirements,

We recommend the use of an adhesion agent (primer). Detailed information on this subject is contained in the primer selection table. A mechanical surface pre-treatment, e.g. sanding or sandblasting, can considerably improve the adhesion.

Application methods

Professional cartridge gun for 290ml cartridges, compressed air gun (we recommend a variation with piston rod), automatic dosing systems.

Joining the parts to be bonded

To ensure optimal wetting, the parts must be joined before the first skin has been formed on the adhesive (skin-overtime).

Storage:

When unopened and stored at room temperature (+23°C and 50% rel. humidity), Weicon elastic one-component adhesives and sealants have a shelf life of 12 months.

Safety and health:

When using Weicon products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.Weicon.com) must be observed.