UAE Dirham
Weiconlock is ready for use and should be applied evenly direct from the bottle or tube with the dispensing tip (avoid direct contact of dispensing tip with metal). For sealing applications, apply Weiconlock in circular motions on the thread. Assemble and tighten parts. Do not pour back into the bottle any Weiconlock fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.
- In general, Weiconlock does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on cleaned, degreased parts (use Weicon Surface Cleaner).
- Weiconlock can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle or tube keeps Weiconlock liquid.
- Handling strength: 10 - 20 min
